|
THE SWIVEL JOINT SPECIALISTS |
|
Home |
|
About Us |
|
Contact Us |
|
Swivel Joints |
|
Articulated Pipework |
|
Previous Projects |
|
Rotaflow FV Ltd,
|
|
To contact us: |
|
Normally supplied with flanged fittings these larger swivel joints can be made from a range of materials with the option of welded overlay material on the seal and bearing surfaces to keep costs low. |
|
Large bore 8 to 30 |
|
With a pressure rating up to 300 bar as standard this smaller range of swivel joints in carbon steel come with BSPP threads male to female either straight or 90 degrees. |
|
F series 1/4 to 2 |
|
This stainless steel range of swivel joints come as standard up to 410 bar. Similar to the F series, this stainless steel variety come with BSPP threads female to female either straight or 90 degrees. |
|
FS series 1/4 to 2 |
|
Due to the infinite possibilities of number, size and orientation of passes the multiport range tend to be designed and manufactured to meet your specific requirements. |
|
Multiport |
|
Similar in design to the SK series the lighter duty swivel joints are more compact for applications where space is limited. |
|
2 to 12 Compact duty |
|
This range of swivel joint is designed and manufactured to order and comes with the option of a metal seal for long life operation in difficult to reach, corrosive environments. Please contact our design team with your requirements. |
|
Sub sea |
|
Ranging in size from 1 nominal bore to 6 nominal bore the SK series come supplied with a range of fitting types including threaded (sizes 1 to 3 only), weld end, flanged and hammer lug union. As with most swivels, the SK range can be produced for a wide range of applications from hygienic, produced from stainless steel to very low temperatures produced from LF2 carbon steel. |
|
SK Series 1 to 6 |
|
Swivel Joints |
|
As the name suggests, jacketed swivels have a larger bore jacket over the smaller bore piped medium. This allows the temperature to be controlled via pumped water or oil. For a more efficient assembly, this can then be wrapped in insulation if required. Please contact our design team with your requirements. |
|
Jacketed |
|
The majority of swivel joints manufactured to carry this kind of internal pressure, are designed for each individual application. This ensures a safe product for the intended medium, built to the required dimensions and specifications. As with most swivels there is also the option of a built in leak detection port for early signs of servicing requirements. Please contact our design team with your requirements. |
|
High pressure (15000 psi) |
|
Copyright © 2011 Rotaflow FV LTD |
|
Not sure which range would best suit your requirements?
Let us do the hard work, simply fill in an enquiry sheet and well get back to you with the optimum swivel joint for your needs.
|